|
Have a special order, email us with your exact requirements, so we can assist you !
N B: Prices may change at any time.
|
| ITEMS |
For product information,
click on the image. |
|
| 25mm Hose Ends: ("O" ring type) |
|
|
 |
A 4 piece copper hose ends, this type require an "O" ring, both ends of the copper are Flanged out to giving non restrictive water flow. |
|
|
| 25mm Hose Ends: (NO ring design, Ilustration only. |
|
|
 |
A 3 piece design copper hose ends, this one does NOT require any O ring, both ends of the copper are Flanged, giving a non restrictive water flow. |
|
|
| 25mm Anti Kink leader hose: (O ring type) |
|
|
 |
This is the first hose you should put on your Pump Outlet as it Stops, the start of the "Lay flat" hose from Collapsing. |
|
|
| 25mm Anti Kink leader hose: |
|
|
 |
This is the first hose you should put on your Pump outlet as it stops the "Lay flat" hose from crimping closed. |
|
|
| 25mm Vacuum Pick-Up Hose: (40mm Foot-Valve) |
|
|
 |
This is a Professional Foot valve, it stops water flowing backwards, great for Centrifugal pumps.
The Foot Valve is purposely oversize (40mm), to give a NON restrictive flow rate to suit a pump discharge up to 280 litres minute. |
|
|
| 25mm Blue Vacuum Hose: (Standard Hose) |
|
|
 |
Standard "Lay Flat" hose, an High pressure hose used to supply water from the Pump to a Sluice/Dredge or designated location/area.
|
|
|
| 25mm Red Vacuum hose: (Heavy Duty) |
|
|
 |
Heavy Duty "Lay Flat" Hose, it will take far more abuse of being dragged over rocks and gravel than the Blue Hose.
|
|
|
|
|
|
This tip fits inside the end of the vacuum hose, has 38mm outside diameter and is made with a small reduction tip to minimise blockages. |
|
|
| 40mm Vacuum Hose: (660g per metre) |
|
|
 |
This Hose is Light in weight but is Very Strong and Flexible, the inside of the hose is smooth, this is what you should be looking for as it assists in reducing the amount of blockages you will get.
This hose will greatly assists in reducing the amount of blockages. |
|
|
|
|
 |
A power jet vacuums water and gravel up the hose to the sluice, this method gives you the strongest vacuum. |
|
|
| 40mm Turbo Vacuum Jet: (Stainless Steel) Purpose built. |
|
|
 |
This Turbo jet has been made with a Long pick up nozzle, this assists to get under large boulders, with Mandrel bends etc... |
|
|
| Dredge Conversion: (for BackPack Sluice) |
|
|
 |
If your back is This Dredge Conversion kit enables the Back-Pack Super Sluice to process far more cubic meters per day. |
|
|
| "H" frame Backpack: (made in Korean) NLA |
|
|
 |
This Korean made backpack has a strong and lightweight aluminium "H" frame with good padded shoulder straps and lumbar support. |
|
|
| "H" frame Backpack: (made in USA) NLA |
|
|
Almost identical to
the above model,
only Better !!! |
This American made backpack is very strong and lightweight aluminium "H" frame, for the extra money this backpack has Wider and Thicker straps and padding as well as better quality fittings than, the Korean version above !!!
For the extra money, this backpack kit is ideal for the professional.
When fitted to a US "Alice bag" it will enable you to carrying two large 43cm (17") Gem sieves as well as all your other prospecting gear or you may want to make your own custom bag. |
|
|
| Motors and Pumps: (150 litres a minute) Two Size Engines Now ! |
|
|
 |
These Low pollution motors have been designed to run on a SPECIAL Fuel/Oil mixture ratio of up to 100:1, but you MUST use a special oil that is designed to be run this lean, DON'T just use any oil at 1:100 or you may damage the motor.
Choose either of these motors to go with the BackPack super sluice Kit.
|
|
|
